Licensing Law & Compliance Attorney for California Cannabis Manufacturers, 2019 Important News, Attorney Information & Updates


California Cannabis Manufacturers


Frequently Asked Questions

If a local jurisdiction has not yet ruled on a cannabis activity, can a cannabis business still apply for a cannabis temporary license or annual license?

By state law, temporary licenses require local authorization to operate a cannabis business. If your local jurisdiction is not providing authorization, you will not be able to apply for a temporary license. If the city or county does not have any ordinances in place specific to cannabis, you must comply with all other rules that would apply to a similar business or facility in order to hold an annual license for cannabis manufacturing.

What is an annual license?

An annual license is valid for 1 year allowing for a cannabis business to conduct commercial cannabis activity.

If the cannabis business has multiple locations, will the cannabis temporary license cover each location of the cannabis business?

Temporary licenses are only valid for one premises. If your business has multiple premises where cannabis manufacturing occurs, you will need to apply for a temporary license for each premises. Beginning January 1, 2018, only licensed businesses will be able to conduct commercial cannabis activity and may only do business with other licensees. If a business is cited for operating without a license, the business might not be able to obtain a license in the future.

What are the cannabis packaging requirements for child-resistant packaging?

Our regulations require that packaging be child-resistant, as defined in section 1700 of the federal Poison Prevention Packaging Act of 1970 (PPPA). The Consumer Product Safety Commission, which administers the PPPA, has an online guide to child-resistant packaging. The PPPA outlines testing procedures for determining whether your product meets the standard of “child resistant.” Testing procedures can be found in the Code of Federal Regulations, Part 1700, Poison Prevention Packaging. If your product packaging meets the guidelines in the PPPA, it can be used for child-resistant packaging.

Do cannabis products require Proposition 65 language on the labeling?

Cannabis businesses must follow all applicable state laws, just like any other business operating in the state. Therefore if the Office of Environmental Health Hazard Assessment (OEHHA) requires your product to contain the Proposition 65 warning statement, then you must follow state law and include that information. OEHHA can provide more information about whether or not it is required for your product.

How does a Cannabis business apply for a cannabis temporary license?

A cannabis business can access the temporary license application on the CDPH website. The completed application and a copy of the business's local city or county authorization can be emailed to mcls@cdph.ca.gov or mailed to the following address:
CDPH – Manufactured Cannabis Safety Branch
Attn: Licensing Unit
PO Box 997377, MS 7606
Sacramento, CA 95899-7377

Where can the cannabis universal symbol be downloaded?

Links to download the universal symbol are on the Regulations page of the state website. It is available in hi-res JPG, PNG and PDF files.

What's the difference between cannabis exit packaging and cannabis secondary packaging?

No. Exit packaging is the package that a consumer’s purchased product is placed into by a retailer so it is ready to leave the store after the sale is complete. The Bureau of Cannabis Control has outlined requirements in their regulations for exit packaging used by retailers. Manufacturers are responsible for packaging and labeling their products in its final form, prior to release to a distributor as a finished product. This includes ensuring that the packaging of the finished product is child resistant. Secondary package is a child-resistant outer package, such as a bag, that a manufacturer can place their product in to fulfill the child-resistant packaging requirement.

How much information regarding my Cannabis Manufacturing business is publicly available?

The Manufactured Cannabis Safety Branch (MCSB) website includes a public Licensee Lookup Tool which contains the business name, license type, license number, city and county, and license expiration date. Additional information will be available to members of the public through a Public Records Act request.

Can a Cannabis business package pre-rolls or flowers if a Cannabis business is a licensed manufacturer?

Yes, manufacturers may package flower or pre-rolls. Flower and pre-rolls that only contain flower must meet the packaging and labeling standards outlined in the California Business and Professions Code. Pre-rolls that also contain concentrates (“infused” pre-rolls) must meet the packaging and labeling requirements for manufactured products that are outlined in the MCSB regulations for cannabis manufacturing.

If the cannabis labeling does not fit on the package, how should the information be added?

The primary panel labeling information and the government warning statement must be on the package itself. If your product packaging is small, and you cannot fit all of the informational labeling on the package, you can use a supplemental label for those additional requirements. Examples of supplemental labels include a paper inserted into the packaging, a hang tag or a peel-back label.

For the newly regulated cannabis market in California, what is the licensing transition period?

The three licensing authorities have outlined a six-month transition period to address existing product and support a smooth transition into a newly regulated market. The transition period allows for existing product to move though the commercial cannabis market if it meets basic requirements.

Can a Cannabis Manufacturer manufacture both adult-use and medicinal cannabis products on the same premises?

Yes, a business can hold licenses for both medicinal and adult-use cannabis manufacturing at the same premises. During the transition period, which is in effect from January 1 to July 1, 2018, products will be able to cross between the medicinal and adult-use markets. Beginning on July 1, 2018, the supply chains for medicinal and adult-use cannabis products must be kept separate.

Is there a place to view a list of recognized cannabis manufacturers?

A Licensee Lookup Tool is available on the Licensing page of the CDPH website.

Can a cannabis business operate prior to being issued and approved for a cannabis temporary license?

Beginning January 1, 2018, you must have a license to operate a cannabis business within the state of California.

Regarding Manufactured Cannabis Products, what is an Extraction activity?

Extraction is removal of THC/CBD from cannabis plants via a mechanical method or chemical solvent method.

Regarding Manufactured Cannabis Products, what is an Edible?

Edibles are cannabis products that can be taken orally. Edibles include vape cartridges, extracts, capsules, and tinctures.

Does a Cannabis business need a manufacturing license if it produces Cannabidiol (CBD) products?

If the CBD in your products comes from a cannabis plant, you will need a license from our office to conduct commercial cannabis manufacturing. However, CBD from industrial hemp is not regulated under the state’s cannabis regulatory framework. The California Department of Food & Agriculture’s Industrial Hemp Advisory Board has some information on the current state laws surrounding industrial hemp and a list of FAQs on their website.

Does a Cannabis business need two separate licenses to do two (Medicinal and recreational Adult-use) types of manufacturing?

You will only need two types of manufacturing licenses for the same premises if you plan to create both adult-use and medicinal products. If you are conducting manufacturing for both the medicinal and adult-use markets, you will need both M- and A-licenses to operate in both of those markets. However you do not need two licenses to conduct different types of manufacturing operations within one of those markets at the same premises, as long as all activities are disclosed on the application. A Type 7 licensee can also conduct Type 6, N & P activities on the same premises. A Type 6 licensee can conduct Type N & P activities on the same premises. A Type N licensee can conduct Type P activities on the same premises.

For a cannabis A-license, would a cannabis manufacturer be allowed to purchase from and sell to cannabis M-license businesses?

During the transition period, which lasts from January 1 until July 1, 2018, you can do business with adult-use licensees or medicinal use licensees, regardless of whether you have an A- or M- license. Beginning July 1, 2018, A-licensees can only do business with A-licensees, and M-licensees can only do business with M-licensees.

Does a Manufacturing business need to obtain a license from CDPH?

Yes, any person or business must obtain a manufacturing license in order to engage in commercial cannabis manufacturing. Each license must have one category and one type.

Are cannabis oils classified as an edible product or a concentrate?

The Manufactured Cannabis Safety Branch has classified infused butters and oils as concentrates.

After a cannabis business receives a cannabis temporary license, how does it apply for the cannabis annual license?

Annual licenses are being accepted through our online system, the Manufactured Cannabis Licensing System (MCLS). MCLS is available to access now on the Licensing page of the CDPH website.

What types of cannabis licenses exist for the state of California?

MCSB will offer four license types for cannabis manufacturers:
Type 7 – for extraction using a volatile solvent (ex: butane, propane and hexane)
Type 6 – for extraction using a mechanical method or non-volatile solvent (ex: CO2, ethanol, water, or food-grade dry ice, cooking oils or butter)
Type N – for infusions
Type P – for packaging and labeling only
Each license type is inclusive of the types in the list below it. For example, a Type 7 licensee would be able to perform Type 6, N or P tasks. A Type 6 license could perform Type N or P tasks. A Type N licensee would be able to perform Type P tasks.
In addition to these four licenses, MCSB is developing a fifth license type, Type S, for shared-use manufacturing facilities. This license type will be for businesses and facility owners that alternate use of a manufacturing premises. More information on this license type will be available soon.
More information about licenses for retailers, distributors, third-party testing laboratories and microbusinesses can be found on the Bureau of Cannabis Control's website. More information about licenses for cultivators can be found on the CalCannabis Cultivation Licensing website.

Can a Cannabis Manufacturer manufacture cannabis products in a commercial kitchen?

At this time, the use of commercial kitchens, in which multiple businesses share use of a single manufacturing space, is not permitted. The Manufactured Cannabis Safety Branch is working diligently to develop a regulatory framework which would allow for shared-use manufacturing facilities. Until this new regulatory language is released and approved, we are not able to issue licenses or accept applications for shared spaces.

To receive a cannabis temporary license, is the business required to have the adult use licenses (A-license) AND the medicinal (M-license)?

During the transition period, which lasts from January 1 until July 1, 2018, you can do business with adult-use licensees or medicinal use licensees, regardless of whether you have an A- or M- license. Beginning July 1, 2018, A-licensees can only do business with A-licensees, and M-licensees can only do business with M-licensees.

For cannabis products during the regulatory transition period, can the exit packaging be the same as the secondary packaging?

No. Exit packaging is the package that a consumer’s purchased product is placed into by a retailer so it is ready to leave the store after the sale is complete. The Bureau of Cannabis Control has outlined requirements in their regulations for exit packaging used by retailers. Manufacturers are responsible for packaging and labeling their products in its final form, prior to release to a distributor as a finished product. This includes ensuring that the packaging of the finished product is child resistant. Secondary package is a child-resistant outer package, such as a bag, that a manufacturer can place their product in to fulfill the child-resistant packaging requirement.

What are the requirements for cannabis packages and cannabis labels?

Cannabis product packaging cannot resemble traditionally available food packages and must be tamper-evident, re-sealable if the product includes multiple servings, and child-resistant. In addition, packaging for edibles must be opaque. All manufactured products must be packaged according to regulatory standards before they are released to a distributor. Cannabis product labeling may not refer to the product as a candy, be attractive to children, make health claims or include cartoons. The labeling requirements fall into two categories: primary panel requirements and informational panel requirements. The primary panel is the portion of the label that is most likely to be displayed to the consumer at retail. Primary panel labeling must include: • The identity of the product • The amount of THC/CBD in the package • The CDPH-issued universal symbol • The net weight or volume In addition, primary paneling for edible products must include the words cannabis-infused and contain the amount of THC/CBD per serving. The informational panel can be located anywhere else on the package. Informational panel labeling requirements include: • The manufacturer's name and contact information (website or phone number) • The date the product was manufactured • The government warning statement • The ingredient list • Instructions for use • The expiration date • The unique ID/batch number In addition, the informational panel for edible products must also contain allergen information, a list of artificial food colorings and basic nutritional information (the amount of sodium, sugar, carbohydrates and fat per serving). Medicinal products must be labeled For Medicinal Use Only.

Does a cannabis business need to also apply for a temporary license if it applies for an annual license?

Beginning January 1, 2018, you must have a license to operate a cannabis business within the state of California. You can apply for an annual license whether or not you have a temporary license.

For A-licenses and M-licenses applications, does a cannabis business have to pay a fee for each if it applies for both types of licenses?

A (adult-use) and M (medicinal use) are two different categories of license. If you apply for both A- and M- annual licenses, you will pay two separate license application fees, and annual license fees – one for each license. The license fees are based on the gross annual revenue of the product produced under each license. For example, the license fee paid for the M-License is based on the gross annual revenue of the medicinal-use product manufactured at the licensed premises; the license fee paid for the A-License is based on the gross annual revenue of the adult-use product manufactured at the licensed premises.

For cannabis pre-rolls, what are the labeling and packaging requirements?

Pre-rolls that only contain flower must follow all packaging and labeling standards outlined in the California Business and Professions Code. Pre-rolls that contain both flower and concentrates (infused pre-rolls) must meet all packaging and labeling required of manufactured products, as outlined in the MCSB regulations for cannabis manufacturers.

When are cannabis businesses required to pay for the cannabis annual license application and fess for licensing?

The application fee is paid when the annual license application is submitted. The licensing fee is paid when the annual license application is approved.

Is there any application fee or licensing fee for MCSB's temporary licenses?

No, there is no application fee or licensing fee for MCSB's temporary licenses.

How much is the CDPH fees for a cannabis temporary license?

There is no fee to apply for a temporary license.

What is a cannabis local authorization and who issues it?

A local authorization is a document from your local city or county that permits you to operate a cannabis business. This documentation will look different in every jurisdiction but may be a cannabis business permit, temporary cannabis license or letter of authorization to operate a cannabis business. Contact your city or county government office for more information about the procedures in your jurisdiction.

Where can a cannabis business get forms that are required for the Live Scan background checks?

The Manufactured Cannabis Safety Branch is currently finalizing the information needed for this process and will post the required “Request for Live Scan” form on the website soon.

Where can a Cannabis Manufacturer find more information on cannabis' health issues?

The California Department of Public Health (CDPH) is leading a campaign called Let's Talk Cannabis, which serves as a resource for Californians seeking fact-based information about cannabis and its effects on their health. More information about the health impacts of cannabis can be found on the CDPH Let's Talk Cannabis website.

Are only cannabis edible products required to have the cannabis universal symbol?

All manufactured cannabis products – both edible and non-edible – must have the universal symbol on the label’s primary panel.

Regarding commercial cannabis manufacturing, can the public search and view a list of local jurisdictions?

The Manufactured Cannabis Safety Branch does not have a list of local jurisdictions that permit commercial cannabis manufacturing.

What are the requirements for cannabis products manufactured during the transition period?

Products manufactured during the transition period, from January 1 until prior to July 1, 2018, must meet THC limits, product standards and basic packaging and labeling requirements. Cannabis products must be in child-resistant packaging, and the label must contain the government warning statement and amount of THC/CBD per serving and per package.

What are the Cannabis state licensing authorities?

There are three state licensing authorities that each regulate a different aspect of the commercial cannabis market:
• Bureau of Cannabis Control, CA Department of Consumer Affairs – responsible for licensing cannabis retailers, distributors, third-party testing laboratories and microbusinesses.
• Manufactured Cannabis Safety Branch, CA Department of Public Health – responsible for licensing manufacturers of cannabis products
• CalCannabis Cultivation Licensing, CA Department of Food & Agriculture – responsible for licensing cannabis cultivators and operating the state's Track-and-Trace system

Regarding quantity, what is the cannabis license limit a person can have?

Unless otherwise prohibited, there is no limit on the number of licenses a person can have.

Are butters classified as an edible product or a concentrate?

The Manufactured Cannabis Safety Branch has classified infused butters and oils as concentrates.

Regarding Manufactured Cannabis Products, what is a Concentrate?

Concentrates are cannabis products that contain concentrated THC/CBD. Concentrates include resin, wax and oil.

During the regulatory transition period, what are the requirements for the packaging and labeling?

During the transition period, which lasts from January 1 until July 1, 2018, cannabis products may enter the commercial cannabis market if they have child-resistant packaging and the label contains the government warning statement and the amount of THC per serving. If the primary packaging is not child-resistant, the product may be placed in secondary packaging that is child-resistant to fulfill this requirement.

Regarding Manufactured Cannabis Products, what is an Infusion activity?

Infusion means putting THC/CBD concentrates directly into a product.

During the transition period, what are cannabis product requirements for THC limits?

All cannabis products manufactured on or after January 1, 2018 must meet regulatory THC limits. Edible products cannot contain more than 10 milligrams per serving or 100 milligrams per package. Non-edible cannabis products cannot contain more than 1,000 milligrams per package (adult-use) or 2,000 milligrams per package (medicinal).

For MAUCRSA, if a cannabis business does not yet know what the gross annual revenue shall be for the initial year of operation, what should be listed?

For the first year of operations, the gross annual revenue is an estimate. In subsequent years, the gross annual revenue is based on the prior year’s taxes. A good-faith attempt must be made to create an accurate first year estimate. When you submit your annual license application, you will attest under penalty of law that the information in your application is true and accurate.

Does a temporary license or annual license require a local authorization?

Yes

What does MCSB stand for?

Manufactured Cannabis Safety Branch

What is the limit to the number of Cannabis licenses the California Department of Public Health (CDPH) can issue?

No limit is in place for the number of licenses that CDPH will issue.

What does cannabis local authorization mean?

Both Proposition 64 and the Medicinal and Adult-Use Cannabis Regulation and Safety Act (MAUCRSA) established a dual licensing structure in which both the state and local governments play a role in setting guidelines and public health standards for cannabis businesses. For temporary licenses, you must have local authorization to operate a cannabis business. This may be a cannabis permit, letter of acknowledgement, or another form of local authorization. You are required to submit a copy of this local authorization with your temporary license application. For annual licenses, you must be in compliance with all local ordinances. If your local jurisdiction has passed an ordinance allowing for cannabis manufacturing, you must comply with any rules established by these ordinances. If the city or county does not have any ordinances in place specific to cannabis, you must comply with all other rules that would apply to a similar business or facility. If the local jurisdiction has banned commercial cannabis manufacturing, you will not be able to obtain a state cannabis license.

For a commercial cannabis manufacturing business, what is the criteria to determine if a cannabis product is considered edible or non-edible?

Edible cannabis products are products that are similar to traditional food products, such as cakes, cookies, beverages and juices, tea and coffee, chocolates, gummies, gum, and mints. Edible products have a THC limit of 10 milligrams per serving and 100 milligrams per package for both the medicinal and adult-use markets. Cannabis concentrates are not classified as edible products. Concentrates include products like tinctures, capsules, extracts, butter, cooking oils and vape cartridges. Concentrates have a THC limit of 1,000 milligrams per package for the adult-use market and 2,000 milligrams per package for the medicinal market. If you have a question about how your product is classified, email MCSB@cdph.ca.gov.

What does the California MCSB do?

The Manufactured Cannabis Safety Branch (MCSB), housed within the California Department of Public Health, licenses and regulates manufacturers of commercial cannabis products.

To manufacture cannabis products, does the business have to be licensed?

Yes, the business must be licensed with MCSB (Manufactured Cannabis Safety Branch) in order to legally manufacture cannabis goods.

Can a business extend their MCSB temporary license?

Yes, a business can extend their MCSB temporary license by 90 days if submitted with a complete annual license application, subject to the discretion of MCSB.

How does a cannabis business acquire a cannabis local authorization and where can it be obtained?

Local authorization comes from the city or county that has jurisdiction where you have your manufacturing facility. If you are located within an incorporated city’s limits, the city will likely have jurisdiction. If you are located in an unincorporated area of the county, the county will likely have jurisdiction.

If any criminal history exists, would that produce an automatic denial of the cannabis annual license business application?

There are no mandatory denials for criminal history. The Manufactured Cannabis Safety Branch will be evaluating each applicant’s history on a case-by-case basis. Convictions that are considered “substantially related” and possibly could lead to denial are serious and violent felonies, drug offenses involving minors, and violations of food safety laws. If you have this type of conviction, you can submit evidence of rehabilitation and a description of circumstances. This information will be considered during the application review process.

For how long can a cannabis business operate under a cannabis temporary license?

A temporary license is valid for 120 days from the date of the license. MCSB may approve 90-day extension periods if the holder of the temporary license submits a complete annual license application prior to the expiration date of the temporary license.

For how long does it take to process a cannabis temporary license application?

MCSB is committed to processing applications for temporary licenses as quickly as possible to minimize disruption to the market. Once an application is received, it will be reviewed for completeness and the city or county office will be contacted to verify the local authorization. The local office will be given up to 10 days to respond. If the local office confirms that the business is authorized to conduct commercial cannabis activities, MCSB will issue the license. No licenses will have an effective date prior to January 1, 2018. If commercial cannabis activity is banned in the city or county where your premises is located, you will not be able to obtain a state cannabis license.

What is a temporary license?

A temporary license is valid for 120 days and is a MCSB conditional license allowing for a cannabis business to conduct commercial cannabis activity.


State Authority & Contact:

Manufactured Cannabis Safety Branch (CA Department of Public Health)
PO Box 997377, MS 7606, Sacramento CA 95899-7377
Email: mcsb@cdph.ca.gov
Phone: 855-421-7887

Scope of Licenses:

MCSB will offer four license types for cannabis manufacturers (7, 6, N, P):
  • A-Type 7 – for extraction using a volatile solvent (ex: butane, propane and hexane)
  • M-Type 7 – for extraction using a volatile solvent (ex: butane, propane and hexane)
  • A-Type 6 – for extraction using a mechanical method or non-volatile solvent (ex: CO2, ethanol, water, or food-grade dry ice, cooking oils or butter)
  • M-Type 6 – for extraction using a mechanical method or non-volatile solvent (ex: CO2, ethanol, water, or food-grade dry ice, cooking oils or butter)
  • A-Type N – for infusions
  • M-Type N – for infusions
  • A-Type P – for packaging and labeling only
  • M-Type P – for packaging and labeling only
  • Type S, for shared-use manufacturing facilities. This license type will be for businesses and facility owners that alternate use of a manufacturing premises. More information on this license type will be available soon.


  • Each license type is inclusive of the types in the list below it. For example, a Type 7 licensee would be able to perform Type 6, N or P tasks. A Type 6 license could perform Type N or P tasks. A Type N licensee would be able to perform Type P tasks.

Requirements:

  • Written statement, signed by the landlord, allowing cannabis manufacturing on the property
  • Diagram of the premise
  • Closed loop system certification, signed by a licensed engineer (for manufacturers using volatile solvents or CO2 extraction methods)
  • Proof of $5000 surety bond
  • Local authorization
  • Live Scan
  • California Tax Permit
  • FEIN
  • Written Procedures for inventory control
  • Written Procedures for quality control
  • Written Procedures for transportation
  • Written Procedures for security
  • Written Procedures for cannabis waste disposal
  • Compliance with THC Limits
  • Compliance with Packaging & Labeling
  • Compliance with Product Standards and Prohibited Products

Licensing Fees:

The licensing fees are scaled based on maximum revenue and they range from $2,000 to $75,000 for each licensed premises.
  • Annual Gross Revenue up to $100,000 (Tier I): Fee of $2,000
  • Annual Gross Revenue $101,000 to $500,000 (Tier II): Fee of $7,500
  • Annual Gross Revenue $500,001 to $1,500,000 (Tier III): Fee of $15,000
  • Annual Gross Revenue $1,500,001 to $3,000,000 (Tier IV): Fee of $25,000
  • Annual Gross Revenue $3,000,001 to $5,000,000 (Tier V): Fee of $35,000
  • Annual Gross Revenue $5,000,001 to $10,000,000 (Tier VI): Fee of $50,000
  • Annual Gross Revenue over $10,000,001 (Tier VII): Fee of $75,000

Application Fee - Processing fee of $1,0000 per license

Forms:


Resources:








California Universal Symbol for Cannabis


California Universal Symbol for Cannabis

Download PNG file or Download JPG file



This site focuses or refers to information and services regarding manufacturing activities license review process Mycotoxins Testing mandated warning statements medicinal and adult-use markets Track and Trace paper inserted into the packaging ISO/IEC 17025 accreditation basic nutritional information ingredient list extracts Financial information retailers sampling standards Medical Cannabis Regulation and Safety Act of 2015 licensed cannabis distributors CalCannabis Cultivation Licensing delivery vehicle $3,000 of cannabis goods compliance with local jurisdiction operating premises Category I Residual Pesticides Testing 2019 important information Mechanical loan provided to a commercial cannabis business medicinal and adult-use commercial cannabis activity A-license and an M-license finished product no added caffeine Local Issuing Authority supply chain inventory transport cannabis goods to retailer temporary license Premises diagram secured area 2019 recent news workshops hosted by the Bureau of Cannabis Control THC levels valid waiver sanitary workplaces The Bureau of Cannabis Control (BCC) manned motor vehicle packaging and labeling requirements commercial kitchens purchasing cannabis products on tribal lands Retailer (nonstorefront) potentially-hazardous foods Standard Operating Procedures (SOPs) 2019 resolutions security and cannabis waste disposal testing of cannabis goods child-resistant packaging Temporary Cannabis Event sales of cannabis goods quality control Non-Storefront Retailer (Type 9) concentrate shared-use manufacturing facilities 2019 new laws manufacturing practices 2019 fines dried flower list of artificial food colorings contaminant free manufacturing cannabis products Microbial Impurities Testing (A. fumigatus, A. flavus, A. niger, A. terreus) conditional license Edibles– Products Foreign Material Testing minimum standards for extraction processes Business Organizational Incorporating THC/CBD concentrates informational panel track and trace system ownership premises is not within a Government Heavy Metals Testing cannabis sales and/or consumption some nutritional facts Criminal History Category II Residual Solvents and Processing Chemicals Testing procedures for inventory control Application Checklist investment into a commercial cannabis business Department of Food and Agriculture’s CalCannabis Cultivation Licensing division Microbusiness exception for testing laboratories M-license Medicinal and Adult-Use Cannabis Regulation and Safety Act (MAUCRSA) local jurisdiction authorization security Water Activity Testing of Solid or Semi-Solid Edibles 2,000 mg of THC per package for the medicinal-use market MCSB’s temporary license application amount of THC/CBD per serving and per package 2019 proposed changes cannabis industries onsite sale and consumption of cannabis goods shaped like a human, animal, insect, or fruit online licensing system inhalable cannabis medicinal and adult-use or both markets separate applications 2019 revisions commercial cannabis manufacturing in California operating procedures Microbial Impurities Testing (Escherichia coli and Salmonella spp.) highly-concentrated THC/CBD such as oil, wax and resin nonlaboratory quality control Owner payable to the state of California disposal A-licensees 120 days sanitary and hazard-free environment licensing cannabis microbusinesses equity interest in a commercial cannabis business Medicinal and Adult-Use Cannabis Regulation and Safety Act Business Information manufacture cannabis products meat and seafood, and other products contaminants cannabis cartoons Physical address Labor peace agreement Water/Food-grade Dry Ice commercial cannabis manufacturing activity public health and safety Butane/Hexane/Propane licensing scheme structure and formation documents health claims scaled to the gross annual revenue of the licensed premises M-licensees an officer or director of a cannabis business Terpenoids Testing Seller’s permit number Category II Residual Pesticides Testing certified by a California-licensed engineer local jurisdiction’s ordinances and regulations packaging and labeling chain of custody Premises Information compliance with regulations activity for a period of 120 days carbohydrates and fat per serving Department of Public Health’s Manufactured Cannabis Safety Branch LICENSE APPLICATION REQUIREMENTS Manufactured Cannabis Licensing System (MCLS) Local Authorization Temporary License Application Information emergency regulations medicinal and adult use cannabis goods transported together shares of stock that are less than 5% of the total shares in a publicly traded company transporting cannabis goods persons 21 years of age or older Type S share facility space Premises Diagram amount of sodium at least 99% purity Identifying information disclosure of all criminal convictions manufacturer's name CO2 and ethanol extractions medicinal commercial cannabis activity managing member Department of Consumer Affairs’ Bureau of Cannabis Control opaque exit package allergen information three state cannabis-licensing authorities 600 foot radius of a school final form 600-foot radius of a school state cannabis licensing capsules health impacts of cannabis supply chains for medicinal and adult-use cannabis products highly-concentrated oils or waxes product guidelines cultivation microbusinesses unique ID/batch number government warning statement label 2019 regulations California Public Records Act secondary package small product packaging destruction of cannabis goods Percentage of ownership Licensee Information periods of 90 days extensions licensed cannabis cultivators Financial Interest Licensees testing laboratories Arranging for laboratory testing transportation and security transportation of cannabis goods Homogeneity Testing of Edible Cannabis Products Industrial Hemp Advisory Board Office of Environmental Health Hazard Assessment (OEHHA) commercial cannabis activity CDPH-9041 onsite consumption of cannabis goods hang tag or a peel-back label Licensee Lookup Tool testing methods manufacturing (Level 1 manufacturing, Type 6) local jurisdiction’s requirements cultivation (on an area less than 10,000 square feet) Individual Owner infusion Local Jurisdictions required limits Local Authorization Attachment aggregate interest of 20% or more laboratory quality assurance Manufactured Cannabis Safety Branch (MCSB) annual license application Temporary event up to 4 days labels not be attractive 2019 compliance A-license commercial cannabis manufacturing Category I Residual Solvents and Processing Chemicals Testing good manufacturing practices packaging licensing cannabis retailers requiring refrigeration Operating Procedures Personnel Requirements Moisture Content Testing labeling designated structure immature live plants and seeds being transported from a licensed nursery licensing and regulating commercial cannabis manufacturers testing lab regulations for medicinal and adult-use cannabis consumption of alcohol or tobacco evidence of the legal right to occupy the premises product as a candy prohibited Vehicle Requirements 100 mg of THC per package local jurisdiction alcoholic beverages CDPH-issued universal symbol access to the area(s) inventory and quality control child-resistant outer package written procedures for inventory control exit packaging three cannabis licensing authorities CDTFA seller’s permit extraction property for the commercial cannabis activity Business and Professions Code section 26050.1 cannabis waste The Manufactured Cannabis Safety Branch (MCSB) A-license and an M-license for the same commercial cannabis activity Form # CDPH-9041 edible products must enter certain events distributors Bond and Insurance Information Distributor Transport Only manufacturing persons with a financial interest in the cannabis business the commercial medicinal and adult-use (recreational) volatile solvent supplemental label California Department of Public Health (CDPH) ANTICIPATED ANNUAL (NONTEMPORARY) LICENSE APPLICATION REQUIREMENTS limited to a maximum of 10 mg of THC per serving secondary packaging Live Scans for each owner conducting quality assurance review 2019 issues limited to a maximum of 1,000 mg per package 2019 laws licensed cannabis manufacturers comply with all packaging and labeling requirements MANUFACTURED CANNABIS SAFETY BRANCH cannabis market hydrocarbon-based solvents Retailer (Type 10) tobacco products at least 20% ownership interest cannabis adult-use products re-sealable Fingerprints Manufactured Cannabis Safety Branch manufacturers who package for other producers premises diagram commercial cannabis manufacturers entry into the legal, regulated market 2019 updates Ethanol disposal and destruction methods stickers Distributor transport Poison Prevention Packaging Act of 1970 (PPPA) cannabis cultivation licensing recordkeeping Temporary License Application tinctures MCSB Cannabis Manufacturing vape cartridges medicinal and adult-use cannabis manufacturing licenses for both medicinal and adult-use cannabis manufacturing at the same premises convicted of a substantially related crime Food-grade Butter/Oil public Licensee Lookup Tool pre-made or purchased surety bond definition of owner licensed premises transportation California Department of Public Health remove THC/CBD Transition Period 2019 problems Bond in the amount of $5,000 cannabis training storage of cannabis goods cannabis plants amount of THC content licensing cannabis distributors loop system financial interest holder evidence of rehabilitation cannabis event organizer license The California Department of Public Health's tamper-evident no infusion of alcohol no infusion of nicotine period of 120 days Completed Temporary License Application Form Proposition 65 edibles packaging opaque identity of the product CALIFORNIA BUREAU OF CANNABIS CONTROL motor carrier permit Extractions using CO2 Conducting quality assurance review of cannabis goods BUREAU OF CANNABIS CONTROL Carbon Dioxide (CO2) diagram of the business’s layout protocol Manufacturing (non-volatile) Cultivation less than 10,000 sugar Cannabinoids Testing regulations for medical and adult-use cannabis in California licensed physical location (premises) topicals commercial cannabis products waste disposal member manager waste management laws Transport vehicles alarm system product formulation Proposition 64: The Adult Use of Cannabis Act of 2016 primary panel requirements adult-use commercial cannabis activity Proposed Section 40133 regulatory framework packaging and labeling requirements for pre-rolls shipping manifest licensing cannabis third-party testing laboratories cannabis products in container or wrapper for sale and more.

In addition, Type 10 (Retailer) infused pre-rolls Commercial-grade, non-residential door lock Specialty Cottage Mixed-Light Tier 1 Processing cakes, cookies, beverages and juices, tea and coffee, chocolates, gummies, gum, and mints Universal symbol Type 2B (Cultivation; Mixed-light; Small) Nursery Type 5 (Cultivation; Outdoor; Large) Contact surface Volatile solvent Bureau M-license Nonvolatile solvent Type 7 – for extraction using a volatile solvent (ex: butane, propane and hexane) Informational panel Microorganisms Medium Indoor Type 6 – for extraction using a mechanical method or non-volatile solvent (ex: CO2, ethanol, water, or food-grade dry ice, cooking oils or butter) Track and trace system Commercial cannabis activity Type P – for packaging and labeling only Finished product Kief Small Mixed-Light Tier 1 THC Allergen cross-contact Type 4 (Cultivation; Nursery) adulteration Cultivation site Request for Live Scan Processing aid Type 9 (Non-Storefront Retailer) Licensee Type 14 (Cannabis Event Organizer) Type 3A (Cultivation; Indoor; Medium) list of cannabis manufacturers Unique identifier Specialty Indoor Validation Personnel Pre-roll Specialty Cottage Mixed-Light Tier 2 Cannabis product Type 1A (Cultivation; Specialty indoor; Small) Type 13 (Distributor Transport Only) Type 1 (Cultivation; Specialty outdoor; Small) Holding Processor Type 1C (Cultivation; Specialty cottage; Small) Limited-access area Type 6 (Manufacturer 1) Extraction: Non-volatile Solvents, Mechanical Methods Small Indoor Labeling Applicant Type S (coming soon, shared-use manufacturing facilities) Nonmanufactured cannabis product alternate use of a manufacturing premises Watts per square foot package flower or pre-rolls Adult-use Market products similar to traditional food products prohibited Sanitize Medium Mixed-Light Tier 2 Wet weight Type P Packaging & Labeling Only Mixed-light Tier 2 MCSB 90-day extension periods Type 3 (Cultivation; Outdoor; Medium) UID Allergen Verification Specialty Mixed-Light Tier 1 Distribution Component CBD track and trace system Mature plant Mixed-light Tier 1 Preventive controls Environmental pathogen Type 2 (Cultivation; Outdoor; Small) Type 5A (Cultivation; Indoor; Large) Ingredient Edible cannabis product Qualified individual infused butters and oils as concentrates Primary panel Small Outdoor Type N Infusions (optional packaging and labeling) Extraction Type 7 (Manufacturer 2) Extraction: Volatile Solvents Infusion Monitor Medium Mixed-Light Tier 1 Type 1B (Cultivation; Specialty mixed-light; Small) Premises Lot cannabis concentrates Quality control personnel Pest Specialty Cottage Outdoor Specialty Mixed-Light Tier 2 In-process material Quality Harvest Batch Theoretical yield CBD from industrial hemp Medium Outdoor THC limit of 10 milligrams per serving and 100 milligrams per package Pathogen Net weight gross annual revenue for first year in operation under MAUCRSA Type 2A (Cultivation; Indoor; Small) Type 5B (Cultivation; Mixed-light; Large) Small Mixed-Light Tier 2 Serving Mixed-light cultivation Department Cultivation Manufacturer licensee Topical cannabis product Flowering DPH-17-010E Type 12 (Microbusiness) Immature plant Hazard Type N – for infusions Raw material Package Canopy Product Identity Process Quality control operation Type 11 (Distributor) Type 3B (Cultivation; Mixed-light; Medium) Quarantine Adequate Batch Specialty Outdoor Dried flower Specialty Cottage Indoor Track-and-trace systems Adulterated Type 8 (Testing Laboratory) Manufacture Actual yield Indoor cultivation Proposition 65 warning statement Outdoor cultivation and more.


Disclaimer: Informational and educational purposes. Self-help services (not legal advice). Site is not affiliated with any state agency. Note that site might not contain the most updated information. Your receipt of any information from this site does not create a relationship. Prior results do not guarantee or suggest a similar result in other matters. No promise is made with regard to services or content's reliability, availabilty, or ability to meet any needs. Information and services provided "AS IS."

All Rights Reserved